Vehicle Contour Marking

 ›   ›  Vehicle Contour Marking

Reflective tape for contour marking of road freight transport.

Контурная маркировка транспорта

Most of drivers often underestimate the reflective tape on the large goods vehicles. And it is in vain! Studies conducted in Europe and USA have made it possible to fully enjoy the positive results and noted a significant reduction of RTA up to 20-40% with participation of car, at least one of which was equipped with reflective tape.

Ukrainian drivers have already placed the reflective tape on their trucks, confidently reported that their safety on the road has increased considerably, as other road users are now able to see ahead the going truck, and also precisely estimate its dimensions even at a night-time.

Adhesive reflective tape for contour marking of road freight transport. Types and main characteristics:

Adhesive reflective tape for vehicle contour marking is a special reflective tape designed to provide visibility of road freight transport at night. This marking tape can prevent up to 90% of accidents, at the same time protecting maximally drivers, passengers and other road users.

The company «Znaki UA» offers high-quality tape TM Reflexite for vehicle contour marking. The base tape consists of special marking prismatic lenses placed in transparent polymer and reliably protected by plastic film on top.

Feature of such a marking film for vehicles is in its high reflective ability, the tape pasted along the perimeter forms a clearly visible car silhouette at night. Thus, having applied a tape for marking on a side and back surface of a car, borders of the truck, will be clearly visible and clearly marked.

Reflective tape is a roll length of 50 m and a width of 5 cm. Warranty for reflective film for hard surfaces is 8 years, 3 years for film for tents. 

Types of tapes for vehicle contour marking

Parameters of the tape Reflexite® VC 104+ Rigid Grade are 50mm x 50m. Application: it is pasted on a hard surface.

Tape Reflexite® VC 104+ Rigid Grade

It is applied to reflective marking of trucks, semi-trailers and trailers. It is pasted on a rigid side area of motor transport.

Colors of the tape Reflexite® VC104 + Rigid Grade: red, yellow and white.

Tapes of yellow and red colors are pasted on a back side, and white and yellow — on the left and right side of motor transport.

Tape rolls length is 50 m and width is 5 cm.

Vehicle Contour Marking

Tape Reflexite® VC104 + Curtain Grade. Application: it is pasted on soft tent of motor transport.

Tape Reflexite® VC104+ Curtain Grade

It is applied for fastening on tents of trucks, semi-trailers and trailers.

Colors of the tape Reflexite® VC104 + Curtain Grade: red, white and yellow.

Tape of yellow and red colors is pasted on the back side, and white and yellow on the left and right side of motor transport.

Tape rolls length is 50 m, a width is 5 cm.

 

 

Vehicle Contour Marking

Tape Reflexite®VC 104+ Curtain Grade Segmented. Application: it is pasted on the soft surface of motor transport.

Tape Reflexite®VC 104+ Curtain Grade Segmented

It is used for reflecting marking of transport by means of fastening on a soft surface (tent) of vehicles, trailers and semi-trailers.

Colors of the tape VC 104 + Curtain Grade Segmented: red, white and yellow.

Tape of yellow and red colors is pasted on the back side, white and yellow - to the left and right sides of the vehicle.

Tape rolls length is 50 m, a width is 5 cm.

 

Vehicle Contour Marking

Tape Reflexite® VC104 + Tanker Stickers Segmented is 50mm x 50m. Application: it is pasted on the gas-tank trucks and tank trucks.

Tape Reflexite® VC104+ Tanker Stickers Segmented

Segmented reflective marking tape is for gas-tank trucks and any tank trucks. It is used for reflecting marking of trailers tanks, fuel trucks round or oval cross-section.

Colors of the tape Reflexite® VC104 + Tanker Stickers: red and yellow.

Tape rolls length is 50 m, a width is 5 cm.

 

 

Tape Reflexite® VC 104+ Tanker Stickers Rear Kit Segmented is 50mm x 10m (62 stickers). Method of application: it is pasted on the gas-tank trucks and tank trucks.

Tape Reflexite® VC 104+ Tanker Stickers Rear Kit Segmented

Colors of the tape Reflexite® VC 104+ Tanker Stickers Rear Kit Segmented: red and yellow.

Tape rolls are 10 meters long and 5 cm wide (62 stickers).

 

 

 

 

Vehicle Contour Marking

Tape Reflexite® VC 104+ Imagine (with logo) is 50mm x 50m. Application: it is pasted on the vehicles with the application of corporate logo of your company on the tape.

Tape Reflexite® VC 104+ Imagine (with logo)

Colors of the tape Reflexite® VC 104+ Imagine (with logo): red, white and yellow.

Tape rolls length is 50 m and width is 5 cm.

 

 

Vehicle Contour Marking

Application of reflective tape on the surface of the vehicle

Application of reflective tape on the surface of the vehicle

At first sight, process of application of the reflective tape for the vehicle seems to be simple, but it is not so. Professionalism, tools and experience in this case are necessary to perform this work properly. 

First, it is necessary to clear qualitatively and previously to degrease each site of a surface of the car. As adhesive properties of a film are very powerful, tape gluing requires precision and attentiveness, as well as sensitivity in avoiding the formation of air bubbles and defects under the tape.

The company «Znaki UA» provides services for application of tape for transport marking with maximum attentiveness and due diligence, perfectly guiding in the correct application principles and following closely the necessary consistency of action in the process of gluing the marking tapes.


Address:

Sales department and production:
Kiev, 1 Ozernaya Str. ofc. 5.

info@znakiua.ua

Phone:
044 331-63-66
+38 (044) 353-73-42
+38 (063) 431-45-28
+38 (098) 184-52-02